Onkyo TX-RZ610 User Manual - Page 52
Auto Input Change is set to Off
View all Onkyo TX-RZ610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Default Value Network Standby On Bluetooth Wakeup Off Setting Details When this feature is turned "On", you can turn on the power of the unit via the network using an application such as Onkyo Remote that can control this unit. • When "Network Standby" is used, the power consumption increases even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. • "Network Standby", which suppresses power consumption, may be disabled when the network connection is lost. Use the power button on the remote controller or main unit to turn the unit on if this happens. This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. "On": Use this function "Off": Do not use this function • Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. • This setting is fixed to "Off" if "Bluetooth" "Auto Input Change" is set to "Off". • Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear when the network feature is started. 6� Multi Zone Make settings related to Multi-zone Connection, such as the volume for the separate room. ˙ 1� Zone 2 Setting Item Output Level Default Value Fixed Maximum Volume Off Power On Volume Last Setting Details Select which of the integrated amplifier in a separate room or this unit should be used to adjust the volume when Zone 2 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit Set the maximum value for Zone 2 to avoid too high volume. Select a value from "Off", "50" to "99". Set the Zone 2 volume level of when this unit is turned on. Select a value from "Last" (Volume level when the unit was turned off), "Min", "1" to "99" and "Max". • You cannot set a higher value than that of "Maximum Volume". ˙ 5� 12V Trigger Setting Item Zone Default Value Main Setting Details Set which zone to output the 12V trigger when playing. If you select "All", then the 12V trigger is output to all zones that are playing. 20