Onkyo TX-RZ810 User Manual - Page 17
if you connect, ZONE 2/3 PRE/LINE OUT
View all Onkyo TX-RZ810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
> Before start > Hookup > Setup > Playback > Part Names Necessary for ZONE 3 BD/DVD 1 Analog audio cable 1 ZONE3 LINE IN MAIN ROOM ZONE2 LINE IN if you connect: ZONE 2/3 PRE/LINE OUT You can enjoy 2ch audio in the separate room through speakers connected to a pre-main amplifier or power amplifier by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2/ZONE 3). ZONE 2 Connect with HDMI IN 1 to 3 if you want to output an external AV component to ZONE 2. If the AV component doesn't have an HDMI jack, connect using a digital optical cable, digital coaxial cable, or analog audio cable. If any of these are already used, you do not have to connect using any of the others. ZONE 3 To output the audio of an external AV component to ZONE 3, connect using an analog audio cable. Output to ZONE 3 is not possible when you connect with an HDMI cable or digital optical/coaxial cable. Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (P21) to enjoy this feature. 0 The audio from externally connected AV components can only be output when the audio is analog or 2ch PCM audio signals. If you have connected to this unit with an HDMI cable or digital optical/coaxial cable, may be necessary to convert the audio output of the AV component to PCM output. 17