Onkyo TX-SR304 Owner Manual - Page 58

Specifications - watts

Page 58 highlights

5943@&OCPPL 1BHF  5VFTEBZ +BOVBSZ Specifications Amplifier Section Rated Output Power North American (FTC) All channels: 65 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz, with no more than 0.7% total harmonic distortion All channels: 90 watts per channel min. RMS at 6 ohms, 2 channels driven at 1 kHz, with no more than 0.9% total harmonic European (IEC): distortion 6 ch × 100 W at 6 ohms, 1 kHz, 1ch driven Maximum Output Power Asian (JEITA): 6 ch × 120 W at 6 ohms, 1 kHz, 1ch driven Dynamic Power 160 W + 160 W (3Ω, Front) 125 W + 125 W (4Ω, Front) 85 W + 85 W (8Ω, Front) THD (Total Harmonic Distortion) 0.7% (Power Rated) Damping Factor 60 (Front, 1kHz, 8Ω) Input Sensitivity and Impedance 200 mV/ 47 kΩ (LINE) Output Level and Impedance 200 mV/ 470 Ω (REC OUT) Frequency Response 10 Hz-50 kHz/ +1 dB-3 dB (Direct mode) Tone Control ±10 dB, 80 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 100 dB (LINE, IHF-A) Speaker Impedance 6Ω- 16Ω Video Section Input Sensitivity/Output Level and Impedance 1 Vp-p /75Ω (Component) 0.7 Vp-p /75Ω (Component PB/CB, PR/CR) 1 Vp-p /75Ω (Composite) Component Video Frequency Response 5 Hz-50 MHz Tuner Section ■ FM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD Frequency Response Stereo Separation North American: 87.5 MHz-107.9 MHz European: 87.50 MHz-108.00 MHz Asian: 87.50 MHz-108.00 MHz Stereo: 22.2 dBf (75Ω IHF) Mono: 15.2 dBf (75Ω IHF) Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) Stereo: 0.5% (1 kHz) Mono: 0.3% (1 kHz) 30 Hz-15 kHz / ±1 dB 40 dB (1kHz) ■ AM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD North American: 530 kHz-1710 kHz European: 522 kHz-1611 kHz Asian: 522 kHz-1611 kHz at 9 kHz steps 530 kHz-1710 kHz at 10 kHz steps 300 µV 40 dB 0.7% General Power Supply Power Consumption Stand-by Power Consumption Dimensions (W × H × D) Weight North American: AC 120 V, 60 Hz European: AC 230-240 V, 50 Hz Asian: AC 220-230 V, 50/60 Hz North American: 2.3 A European: 220 W Asian: 220 W North American: 0.1 W European: 0.3 W Asian: 0.3 W 435 × 150 × 369 mm 17-1/8" × 5-7/8" × 14-1/2" 8.4 kg 18.5 lbs. ■ Video Inputs Component DVD, VIDEO1, VIDEO2 Composite DVD,VIDEO1,VIDEO2,VIDEO3 ■ Video Outputs Component MONITOR Composite MONITOR,VIDEO1 ■ Audio Inputs Digital Inputs Analog Inputs Multichannel Inputs Optical: 2 Coaxial: 1 DVD (MULTICHANNEL),VIDEO1, VIDEO2,VIDEO3,TAPE,CD 6 ■ Audio Outputs Analog Outputs TAPE,VIDEO1 Subwoofer Pre Outputs 1 Speaker Outputs SP-A (L, R, C, SL, SR) + SP-B (L, R) Phones 1 Specifications and features are subject to change without notice. 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

58
Specifications
Amplifier Section
Video Section
Tuner Section
FM
AM
General
Video Inputs
Video Outputs
Audio Inputs
Audio Outputs
Specifications and features are subject to change without
notice.
Rated Output Power
North American (FTC)
All channels:
65 watts per channel min. RMS at
8 ohms, 2 channels driven from 20 Hz
to 20 kHz, with no more than 0.7% total
harmonic distortion
All channels:
90 watts per channel min. RMS at
6 ohms, 2 channels driven at 1 kHz,
with no more than 0.9% total harmonic
distortion
European (IEC):
6 ch
×
100 W at 6 ohms, 1 kHz, 1ch driven
Maximum Output Power
Asian (JEITA):
6 ch
×
120 W at 6 ohms, 1 kHz, 1ch driven
Dynamic Power
160 W + 160 W (3
, Front)
125 W + 125 W (4
, Front)
85 W + 85 W (8
, Front)
THD (Total Harmonic
Distortion)
0.7% (Power Rated)
Damping Factor
60 (Front, 1kHz, 8
)
Input Sensitivity and
Impedance
200 mV/ 47 k
(LINE)
Output Level and
Impedance
200 mV/ 470
(REC OUT)
Frequency Response
10 Hz–50 kHz/ +1 dB–3 dB (Direct mode)
Tone Control
±10 dB, 80 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
Speaker Impedance
6
– 16
Input Sensitivity/Output
Level and Impedance
1 Vp-p /75
(Component)
0.7 Vp-p /75
(Component P
B
/C
B
, P
R
/C
R
)
1 Vp-p /75
(Composite)
Component Video
Frequency Response
5 Hz–50 MHz
Tuning Frequency
Range
North American: 87.5 MHz–107.9 MHz
European: 87.50 MHz–108.00 MHz
Asian: 87.50 MHz–108.00 MHz
Usable Sensitivity
Stereo: 22.2 dBf (75
IHF)
Mono: 15.2 dBf (75
IHF)
Signal to Noise Ratio
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD
Stereo: 0.5% (1 kHz)
Mono: 0.3% (1 kHz)
Frequency Response
30 Hz–15 kHz / ±1 dB
Stereo Separation
40 dB (1kHz)
Tuning Frequency
Range
North American: 530 kHz–1710 kHz
European: 522 kHz–1611 kHz
Asian:
522 kHz–1611 kHz at 9 kHz steps
530 kHz–1710 kHz at 10 kHz steps
Usable Sensitivity
300 μV
Signal to Noise Ratio
40 dB
THD
0.7%
Power Supply
North American: AC 120 V, 60 Hz
European:
AC 230-240 V, 50 Hz
Asian:
AC 220–230 V, 50/60 Hz
Power Consumption
North American: 2.3 A
European: 220 W
Asian: 220 W
Stand-by Power
Consumption
North American: 0.1 W
European: 0.3 W
Asian: 0.3 W
Dimensions
(W
×
H
×
D)
435
×
150
×
369 mm
17-1/8"
×
5-7/8"
×
14-1/2"
Weight
8.4 kg
18.5 lbs.
Component
DVD, VIDEO1, VIDEO2
Composite
DVD,VIDEO1,VIDEO2,VIDEO3
Component
MONITOR
Composite
MONITOR,VIDEO1
Digital Inputs
Optical: 2
Coaxial: 1
Analog Inputs
DVD (MULTICHANNEL),VIDEO1,
VIDEO2,VIDEO3,TAPE,CD
Multichannel Inputs
6
Analog Outputs
TAPE,VIDEO1
Subwoofer Pre Outputs
1
Speaker Outputs
SP-A (L, R, C, SL, SR) + SP-B (L, R)
Phones
1
TX-SR304_En.book Page 58 Tuesday, January 24, 2006 10:01 AM