Onkyo TX-SR603X Owner Manual - Page 43
Component Video Setup
View all Onkyo TX-SR603X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
First Time Setup-Continued Component Video Setup If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD player to COMPONENT IN 3, you should assign it to the DVD input selector. If you want to output composite and S-Video sources from the COMPONENT VIDEO OUT, select VIDEO, as explained below. Input selector VIDEO IN jack DVD IN 1 VIDEO 1 IN 2 VIDEO 2 VIDEO 3 VIDEO 4 IN 3 VIDEO VIDEO 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. 4 Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 ENTER Use the Up and Down [ ]/[ ] buttons to select "0. Initial Setup," and then press [ENTER]. The Initial Setup menu appears. ENTER 3 ENTER Use the Up and Down [ ]/[ ] buttons to select an input selector, and then use the Left and Right [ ]/[ ] buttons to select: IN1: Use the video component connected to COMPONENT VIDEO IN 1. IN2: Use the video component connected to COMPONENT VIDEO IN 2. IN3: Use the video component connected to COMPONENT VIDEO IN 3. VIDEO: Output composite video and S-Video sources from the COMPONENT VIDEO OUT. 43