Onkyo TX-SR603X Owner Manual - Page 61

Basic Operations-Continued The following table lists all the listening modes and shows which modes can be selected for each input signal format. Input signal format Analog, PCM*1 Dolby D 3/2, 2/2 2/0 1/0,1+1 Other 3/2, 2/2 Listening mode Source CD, TV, LD, VHS, MD, turntable, radio, cassette, DTV, etc. DVD, DTV, etc. Direct ❍ ❍ ❍ ❍ ❍ ❍ Stereo ❍ ❍ ❍ ❍ ❍ ❍ Mono ❍ ❍ ❍ ❍ ❍ ❍ PLIIx Movie/Music/Game *3 ❍ ❍ Neo:6 Cinema ❍ ❍ Neo:6 Music *4 ❍ ❍ Dolby D ❍ ❍ Dolby D EX *5 ❍ Dolby D+PLIIx Movie *6 ❍ Dolby D+PLIIx Music *5 ❍ DTS, DTS 96/24 ❍ DTS+Neo:6 *5 ❍ DTS+Dolby EX *5 ❍ DTS+PLIIx Movie *6/Music *5 ❍ DTS-ES Discrete *5 DTS-ES Matrix *5 Multich Mono Movie Orchestra Unplugged ❍ ❍ ❍ ❍ ❍ ❍ Studio-Mix TV Logic All Ch Stereo ❍ ❍ ❍ ❍ ❍ ❍ Full Mono ❍ ❍ ❍ ❍ ❍ ❍ DTS/DTS 96/24*2 2/0 1/0, 1+1 Other DTS- Multich ES DVD, LD, CD, etc. DVD ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍*7 Discrete Matrix ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ 1. In the Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz, respectively. 96 kHz signals are processed at 48 kHz for all listening modes other than Direct and Stereo. 2. In the Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else is processed as DTS. 3. If the SurrBack parameter is set to "None," or the Zone 2 speakers are being used, PLII is used. 4. Available only when Surround speakers are connected. 5. Cannot be selected if the SurrBack parameter is set to "None" or the Zone 2 speakers are being used. 6. Cannot select if the SurrBack ch setting is not set to "2ch," or the Zone 2 speakers are being used. 7. If the SurrBack setting is set to "None," or the Zone 2 speakers are being used, DTS is used. 61