Optoma EH415e Manual - Page 81
PJLink™ supported commands, Command Description Remark Parameter
View all Optoma EH415e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Appendices Command Config-URL Revision Description Remark (Parameter) Device's IP address LAN IP address is shown up if LAN IP address is valid. http://xxx.xxx.xxx. xxx/index.html Wireless LAN IP address is shown up if Wireless LAN IP address is valid. The revision must follow a major. 1.0.0 minor.micro scheme. The revision is only increased if the command protocol is modified. Noottee • For wide screen resolution (WXGA), the compatibility support is dependent on Notebook/PC models. • This AMX function is only to support AMX Device Discovery. • The broadcast information only send out through valid interface. • Both LAN and Wireless LAN interfaces could be supported at the same time. • If "Beacon Validator" was used. Please take care below information. PJLink™ supported commands The table below shows commands to control the projector using the PJLink™ protocol. Command Description Remark (Parameter) Command POWR POWR? INPT Description Power control Inquiry about the power state INPT Input switching Remark (Parameter) 0 = Standby 1 = Power on 0 = Standby 1 = Power on 2 = Cooling down 3 = Warming up 11 = VGA1 80