Optoma EP732H User Manual - Page 10

Installation 111111111222222222333333333444444444555555555666666666777777777888888888999999999000000000111111111222222222333333333444444444555555555666666666777777777888888888999999999000000000111111111222222222333333333444444444555555555666666666777777777888888888999999999000000000111111111222222222111111111222222222333333333444444444555555555666666666777777777888888888999999999000000000111111111222222222333333333444444444555555555666666666777777777888888888999999999000000000111111111 Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap.n 2. Ensure that the power cord and signal cable are securely connected. The "Power/Standby" button will flash green. 3. Turn on the lamp by pressing "Power/Standby" button on the control panel. And the "Power/Standby" button will turn green.o The startup screen will display for 30 seconds. 4. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. ™ If the screen displays "No Signal", please make sure the signal cables are securely connected. ™ If you connect multiple sources at the same time, use the "Source" button on the remote control or control panel to switch. ™Turn on the projector first and then the signal sources. 2 Power/ Standby English ... 10 1 Lens cap