Optoma GT750ST User manual - Page 25
Image, Zoom in or zoom out the image. Options are: 50% - 3d
View all Optoma GT750ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Image The Image menu allows you to modify various image settings, such as 3D, format, zoom, color temperature, color space, and others. Image 3D 3D Sync. Invert Format Zoom Color Temperature Color Space Frequency Phase On Off Auto Warm Auto Select Exit Enter 3D: Turn the 3D function on or off. 3D Sync. Invert: Turn the 3D sync. inverter option on or off. Note: -3D/3D Sync. Invert cannot be changed when you select image settings. - In 3D mode, the maximum supported input timing is 1024x768 @ 120Hz. Format: Select the format to adjust how the image appears. Options are: yy Auto: Maintain the aspect ratio of the image projector according to the input source. yy 4:3: The input source scales to fit the screen and projects a 4:3 image. yy 16:9: The input source scales to fit the screen and projects a 16:9 image. yy 16:10: The input source scales to fit the screen and projects a 16:10 image. Zoom: Zoom in or zoom out the image. Options are: 50%, 75%, 100%, 125%, 150%, 175%, or 200%. Color Temperature: Select the color temperature. Options are: Warm, Medium, and Cold. Note: The Color Temperature function is not supported in Bright, Eco, and 3D modes. Color Space: Select an appropriate color matrix type. Options are: Auto, RGB, and YUV. Note: The Color Space function is supported only in HDMI mode. Frequency: Change the display data clock frequency to match the frequency of your computer's graphics card. If you see a vertical flickering wave, use the Frequency control to minimize the bars. This is a coarse adjustment. Note: The Frequency can be adjusted only in VGA mode. English 25