Optoma H183X User manual - Page 33
Display 3D menu, Brightness Mode Lamp base data, Bright, Dynamic, Reset, 3D Mode, DLP-Link, L Left°
View all Optoma H183X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
USING THE PROJECTOR Brightness Mode (Lamp base data) Adjust the brightness mode settings for lamp-based projectors. Bright: Choose "Bright" to increase the brightness. Eco: Choose "Eco" to dim the projector lamp which will lower power consumption and extend the lamp life. Dynamic: Choose "Dynamic" to dim the lamp power which will be based on brightness level of the content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will be extended. Reset Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to significantly reduced lamp power consumption (up to 70%) during periods of inactivity. Return the factory default settings for color settings. Display 3D menu 3D Mode Use this option to disable the 3D function or select the appropriate the 3D function. Off: Select "Off" to turn off 3D mode. DLP-Link: Select to use optimized settings for DLP 3D Glasses. IR: Select "IR" to use optimized setting for IR 3D Glasses. 3D → 2D Use this option to specify how the 3D content should appear on the screen. 3D: Display 3D signal. L (Left): Display the left frame of 3D content. R (Right): Display the right frame of 3D content. 3D Format Use this option to select the appropriate 3D format content. Auto: When a 3D identification signal is detected, the 3D format is selected automatically. SBS: Display 3D signal in "Side-by-Side" format. Top and Bottom: Display 3D signal in "Top and Bottom" format. Frame Sequential: Display 3D signal in "Frame Sequential" format. 3D Sync Invert Use this option to enable/disable the 3D sync invert function. English 33