Optoma HZ39HDR HZ39HDR UM - Page 42
Setup HDMI link settings menu, Setup test pattern menu, HDMI Link, Inclusive of TV, Power On Link
View all Optoma HZ39HDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
USING THE PROJECTOR Setup HDMI link settings menu Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Amplifier HDMI DVD Player HDMI Link Enable/disable the HDMI Link function. The inclusive TV, power on link, and power off link options will only available if the setting is set to "On". Inclusive of TV Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both devices to be turned off at the same time, set the setting to "No". Power On Link CEC power on command. Mutual: Both projector and CEC device will be turned on simultaneously. PJ Device: The CEC device will be turned on only after the projector is switched on. Device PJ: The projector will be switched on only after the CEC device is turned on. Power Off Link Enable this function to let both HDMI Link and projector to be automatically turned off at the same time. Setup test pattern menu Test Pattern Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off). 42 English