Optoma TW631-3D User's Manual - Page 32

EN-32, Wireless, 3D Mode, 3D Sync Invert

Get Optoma TW631-3D PDF manuals and user guides View all Optoma TW631-3D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

devices. „ On: Assign an IP address to the projector from an external DHCP server automatically. „ Off: Assign an IP address manually. „ IP Address: Select an IP address. „ Subent mask: Select subnet mask number. „ Gateway: Select the default gateway of the network connected to the projector. „ DNS: Select DNS number. „ Apply: Press " " and then choose "Yes" to apply the selection. Wireless This setting is only for wireless module use. Wireless is only functional with VGA 1 connector. 3D Mode „ On: Enable 3D Mode function. „ Off: Disable 3D Mode function. When 3D Sync is set to "On", the settings for input source or broadcast device are required as below: 1. For S-VIDEO and VIDEO input source, signal type should be NTSC (60). 2. For computer input source, the hardware and software requirements should be Windows 7 operating system, 3D videos and professional 3D video player softwares. Computer's output frequency should be 120Hz and display card should be higher than NVIDIA 9800. 3D Sync Invert „ On: Invert left and right frame contents. „ Off: Default frame contents. EN-32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
EN-32
devices.
On: Assign an IP address to the projector from an external DHCP
server automatically.
Off:
Assign an IP address manually.
IP Address: Select an IP address.
Subent mask: Select subnet mask number.
Gateway: Select the default gateway of the network connected to the
projector.
DNS: Select DNS number.
Apply: Press "
" and then choose "Yes" to apply the selection.
Wireless
This setting is only for wireless module use.
Wireless is only functional with VGA 1 connector.
3D Mode
On: Enable 3D Mode function.
Off: Disable 3D Mode function.
When 3D Sync is set to "On", the settings for input source or broadcast
device are required as below:
1.
For S-VIDEO and VIDEO input source, signal type should be NTSC (60).
2.
For computer input source, the hardware and software requirements
should be Windows 7 operating system, 3D videos and professional 3D
video player softwares. Computer's output frequency should be 120Hz
and display card should be higher than NVIDIA 9800.
3D Sync Invert
On: Invert left and right frame contents.
Off: Default frame contents.