Optoma W416 User manual - Page 19
Selecting an input source, Powering off
View all Optoma W416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
USING THE PROJECTOR Powering off 1. Turn off the projector by pressing the " " either on the projector keypad or the remote control. 2. The following message will be displayed: Power Off Power Off? Press power key again. Power Switch 3. Press the " " again to confirm, otherwise the message will disaFprpeeezear after a period of time (by default after 10 seconds). When you press the " " button for the second time, the projector will shut down. L R 4. The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the On/ Standby LED will flash green or flash blue. When the On/Standby LED turns solid red, this indicates the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the cooling cycle has finished and the projector has entered stanEdnbtery mode. When the projector is in standby mode, simply press the " " button again to turn on the projector. 5. Disconnect the power lead from the electrical outlet and the projector. Note: It is not recommended that the projector is turned on immediately, right after a power off procedure. Selecting an input source Page- Laser Page+ Keystone Volume Turn on the connected source that you want to display on the screen, -such a+s co-mpute+r, notebook, video player, etc. The projector will automatically detect the source. If multiple sources1 are co2 nnect3ed, push the source button on the projector keypad or the remote control to select the desired input. Menu 3D 4 5 6 HDMI VGA Video 7 8 9 User1 User2 User3 or 0 Source Resync Power Switch Freeze L R Enter Page- Laser Page+ Keystone -+ Volume -+ 1 4 HDMI 7 User1 Source 2 Menu 5 VGA 8 User2 0 3 3D 6 Video 9 User3 Resync English 19