Optoma W505 User Guide - Page 54
Setup | LAN Settings
View all Optoma W505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
User Controls Setup | LAN Settings v Network sub-menu can only be accessed if a network cable is connected. If the connection is successful, the OSD display will show the following dialogue box. 4 Network State-to display network information. 4 DHCP: On: Assign an IP address to the projector from the DHCP server automatically. Off: Assign an IP address manually. 4 IP Address-Select an IP address 4 Subnet Mask-Select subnet mask number. 4 Gateway-Select the default gateway of the network connected to the projector. 4 DNS-Select DNS number. 4 Apply-Press Enter to apply the selection. 4 MAC Address-Read only. English 54
English
54
Setup | LAN Settings
If the connection is successful, the OSD display will show the following
dialogue box.
4
Network State—to display network information.
4
DHCP:
On: Assign an IP address to the projector from the DHCP server
automatically.
Off: Assign an IP address manually.
4
IP Address—Select an IP address
4
Subnet Mask—Select subnet mask number.
4
Gateway—Select the default gateway of the network connected to the
projector.
4
DNS—Select DNS number.
4
Apply—Press
Enter
to apply the selection.
4
MAC Address—Read only.
v
Network
sub-menu
can only be
accessed if a
network cable
is connected.
User Controls