Optoma WU470 English Manual - Page 55
LAN Display, Get the PC/MAC HDCast Pro software
![]() |
View all Optoma WU470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
USER CONTROLS LAN Display 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC/MAC (Laptop). Make sure the projector and PC/MAC in the same local network. 2. Get the PC/MAC HDCast Pro software from https://www.optoma.com/hdcastpro/ and install it. 3. Power on the projector - check to make sure the projector has obtained an IP address. 4. Change source to Network Display. 5. Open the HDCast Pro, then press " Search". If the connection between the PC/MAC and the projector is done, the HDCastPro will find the corresponding projector. 6. Double click the projector to connect. 7. After connecting, select Mirror On/Off to start mirroring screens of PC/MAC. Note: The projector and PC should be on the same network. Ensure DHCP mode is to "ON", the projector will obtain an IP address automatically. This should take approx. 10-20 seconds. English 55
![](/manual_guide/products/optoma-wu470-english-manual-4dacc4c/55.png)