Optoma WU470 English Manual - Page 60
IP Address: 192.168.0.100, Subnet Mask: 255.255.255.0
View all Optoma WU470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
USER CONTROLS 7. Press (Menu) button on the projector. 8. Select OSD -> Network -> Lan. 9. After getting into Network Status, input the following: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255.0 ±± Gateway: 192.168.0.254 ±± DNS: 192.168.0.51 ±± DNS2: 8.8.4.4 10. Press (Enter) button to confirm settings. 11. Open a web browser (ex, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher). 12. In the Address bar, input the IP address: 192.168.0.100. 13. Press (Enter) button. The projector is setup for remote management. The LAN/RJ45 function displays as follows. For more information, please visit http://www.crestron.com. 60 English
English
60
USER CONTROLS
7.
Press
(Menu) button on the projector.
8.
Select OSD -> Network -> Lan.
9.
After getting into Network Status, input the following:
±
DHCP: Off
±
IP Address: 192.168.0.100
±
Subnet Mask: 255.255.255.0
±
Gateway: 192.168.0.254
±
DNS: 192.168.0.51
±
DNS2: 8.8.4.4
10.
Press
(Enter) button to confirm settings.
11.
Open a web browser (ex, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
12.
In the Address bar, input the IP address: 192.168.0.100.
13.
Press
(Enter) button.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
For more information, please visit
.