Optoma X303 User Manual - Page 32

Reset

Get Optoma X303 PDF manuals and user guides View all Optoma X303 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Color Settings Press / /"Enter" key to enter the next menu as below and then use / / / key to select color. Press "Enter" to finalize the selection. „ Red/Green/Blue/Cyan/Magenta/Yellow/White: Use / to toggle Hue/ Saturation/Gain and then use / to adjust the value. „ Reset: Choose "Yes" to return the factory default settings for color adjustments. Color Space Select an appropriate color matrix type from AUTO, RGB or YUV. Signal „ Automatic: Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. „ Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. „ Frequency: Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. „ H. Position: Adjust the image left or right within the projection area. „ V. Position: Adjust the image up or down within the projection area. Reset Return the display parameters on IMAGE menu to the factory default settings. EN-32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
EN-32
Color Settings
Press
/
/“Enter” key to enter the next menu as below and then use
/
/
/
key
to select color. Press “Enter” to finalize the selection.
Red/Green/Blue/Cyan/Magenta/Yellow/White: Use
/
to toggle Hue/
Saturation/Gain and then use
/
to adjust the value.
Reset: Choose “Yes” to return the factory default settings for color
adjustments.
Color Space
Select an appropriate color matrix type from AUTO, RGB or YUV.
Signal
Automatic: Automatically selects the singal. If you use this function, the
Phase, frequency items are grayed out, and if Signal is not automatic,
the phase, frequency items will appear for user to manually tune and
saved in settings after that for next time projector turns off and on again.
Phase: Synchronize the signal timing of the display with the graphic
card. If the image appears to be unstable or flickers, use this function to
correct it.
Frequency: Change the display data frequency to match the frequency
of your computer’s graphic card. Use this function only if the image
appears to flicker vertically.
H. Position: Adjust the image left or right within the projection area.
V. Position: Adjust the image up or down within the projection area.
Reset
Return the display parameters on IMAGE menu to the factory default set-
tings.