Optoma X318ST W318ST User Manual - Page 44
Auto Power Off min., VGA Out Standby
View all Optoma X318ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
USING THE PROJECTOR Auto Power Off (min.) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min.) Configure the sleep timer. Sleep Timer (min): Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Note: The Sleep Timer is reset every time when the projector is powered off. Always On: Check to set the sleep timer always on. Quick Resume Set the quick resume setting. On: If the projector is accidentally turned off, this feature allows the projector to be instantly powered on again, if selected within a period of 100 seconds. Off: The fan will start cooling the system after 10 seconds when user turns off the projector. Power Mode (Standby) Set the power mode setting. Active: Choose "Active" to return to normal standby (LAN on, VGA OUT off). Eco: Choose "Eco." to save power dissipation further < 0.5W. Note: The fans will still run in active standby if "Signal Power On" is enabled. LAN (Standby) Enable/Disable the LAN function when the projector is in standby mode. VGA Out (Standby) Enable/Disable the VGA Out function when the projector is in standby mode. USB Power Set the USB power settings. On: The projector is always powered on by a USB power source. Off: The USB Power function is off. Auto: The projector is automatically powered on by a USB power source. 44 English