Optoma X343e S343 User Manual - Page 53
Color Space HDMI input only, Brightness Mode Lamp base data
View all Optoma X343e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
USING THE PROJECTOR Color R G B Reset Exit Color Matching White Color Space (non-HDMI input only): Select an appropriate color matrix type from the following: AUTO, RGB, or YUV. Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto, RGB(0-255), RGB(16-235), and YUV. White Level: Allow user to adjust White Level when inputting Video signals. Note: White level can only be adjusted for Video input source. Black Level: Allow user to adjust Black Level when inputting Video signals. Note: Black level can only be adjusted for Video input source. IRE: Allow user to adjust IRE value when inputting Video signals. Note: IRE is only available with NTSC video format. Signal IRE can only be adjusted for Video input sources. Adjust the signal options. Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If automatic is disabled, the frequency and phase items will appear for tuning and saving the settings. Frequency: Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. H. Position: Adjust the horizontal positioning of the image. V. Position: Adjust the vertical positioning of the image. Exit: Exit the "Signal" menu. Note: Signal can only be adjusted for RGB/Component input sources. Brightness Mode (Lamp base data) Adjust the brightness mode settings for lamp-based projectors. Bright: Choose "Bright" to increase the brightness. Eco.: Choose "Eco." to dim the projector lamp which will lower power consumption and extend the lamp life. Dynamic: Choose "Dynamic" to dim the lamp power which will be based on brightness level of the content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will be extended. Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to significantly reduced lamp power consumption (up to 70%) during periods of inactivity. English 53