Optoma ZW340e Manual - Page 36

USING THE PROJECTOR Setup menu Setup test pattern menu Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off). Setup language menu Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish, Norwegian, Danish, Finnish, Greek, Traditional Chinese, Simplified Chinese, Japanese, Korean, Russian, Hungarian, Czechoslovak, Arabic, Thai, Turkish, Farsi, Vietnamese, Indonesian, and Romanian. Setup menu settings menu Menu Timer Set the duration where the OSD menu stays visible on the screen. Information Hide Enable this function to hide the information message. Setup high altitude menu When "On" is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin. Setup power settings menu Direct Power On Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the "Power" key on the projector keypad or on the remote control. Signal Power On Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected, without pressing the "Power" key on the projector Keypad or on the remote control. Note: ‡ If the "Signal Power On" option is turned "On", the power consumption of the projector in standby mode will be over 3W. ‡ This function is applicable with HDMI source. Auto Power Off (min.) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min.) Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Note: The Sleep Timer is reset every time when the projector is powered off. 36 English