Oreck Steam-It User Guide - Page 6
Operation - cleaner
View all Oreck Steam-It manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ENGLISH Operation Operating Instructions 1. Place the steam cleaner in a horizontal position and remove the water tank cap. Use the funnel provided to slowly fill the 1 liter water tank with clean water. Replace the cap securely. 2. Insert the power plug into an electrical outlet. Make sure the steam cleaner is switched off. 3. Press the ON/OFF switch located on the handle to switch the steam cleaner on. The red heater "ON" light should now be illuminated. 4. Press the steam switch to the "ON" position. After approximately 30 seconds the green "steam ready" light should come on. 5. Turn the steam regulator control to maximum and point the steam nozzle towards a cloth or sink for approximately 10 - 15 seconds, to stabilize the flow and produce a continuous steam. NOTE: Ensure the steam switch is turned off and the powerhead has cooled before connecting the powerhead or any of the other cleaning accessories. Using the Steam-It™ NOTE: Carpets should be dry and vacuumed thoroughly before using the steam cleaner. 1. Align the hole in the side of the powerhead with the lock button on the main body of the steam cleaner. Ensure that the lock button clicks firmly into place. 2. After assembling powerhead, connect the floor cloth to the powerhead by using the towel grips. 3. Turn the steam switch on. 6