Oregon Scientific RGR126 User Manual - Page 9
Low Battery Warning, Clock / Calendar Setting
![]() |
View all Oregon Scientific RGR126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
EN DATA TRANSMISSION Data is sent from the remote thermo sensor approx. every 78 seconds and every 94 seconds from the rain gauge. The reception icon shows the status - see table. THERMO SENSOR RAIN GAUGE DESCRIPTION Searching Connected Disconnected If without obvious reason the main unit display shows that the thermo sensor or rainfall connector is disconnected, press and hold SEARCH to enforce an immediate search.N If that fails, check: • The remote rain gauge and thermo sensor are still in place. • The batteries of the main unit, rain gauge, and thermo sensor are still good. Replace them if necessary. • The transmission is within range and path is clear of obstacles and interference. Shorten the distance if necessary. Then press and hold SEARCH again. LOW BATTERY WARNING There are 3 low-battery indicators - see table. UNIT Main Remote Thermo Sensor Rain Gauge LOCATION ON MAIN UNIT DISPLAY Indoor Temperature Area Outdoor Temperature Area Total Rainfall Area Replace the batteries immediately when the respective indicator lights up. CLOCK / CALENDAR SETTING Press TIME / SET to toggle among today's rainfall, time, date, and year. SET CLOCK & CALENDAR 1. Press TIME / SET to display the clock or calendar. 2. Press and hold TIME / SET for two seconds. 3. Use or to set the desired value. 4. Press TIME / SET to confirm. 5. Repeat steps 3 and 4 to complete all settings. 6. The order of the settings is hour, minute, year, month and day. RGR126(R13)-4(final) 9 9 4/6/05, 5:46 PM
![](/manual_guide/products/oregon-scientific-rgr126-user-manual-cb604a5/9.png)