Oregon Scientific RMR500A User Manual - Page 5
Clock And Calendar, Clock Reception - icons
View all Oregon Scientific RMR500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
EN To search for a sensor: Press and hold + at the same time. The remote sensor reception icon will show the following status: ICON DESCRIPTION Main unit is searching for sensor(s). A channel has been found. The sensor cannot be found. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. CLOCK AND CALENDAR CLOCK RECEPTION This product is designed to synchronize its clock automatically with a clock signal. RMR500: Slide EU / UK to select the signal received. • EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. • UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England. RMR500A: WWVB-60 signal: within 3200 km (2000 miles) of Fort Collins, Colorado. To enable / disable clock signal reception: Press and hold reception. to enable or to disable clock signal NOTE If optional sensors are installed: • clock and calendar display will be replaced by temperature/humidity readings. • press to toggle between clock and temperature/ humidity display, or calendar and temperature/humidity display; the display will return to temperature/humidity display after 1 minute. NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to a window, press and hold to force another signal search. 5 RMR500 IM EN R8.indd 5 2/29/08 11:37:29 AM