Oregon Scientific WMR86 User Manual - Page 9

EN E.g., if it is 10:30 pm now, the bar plotted directly above -1 shows the reading recorded from 9 to 10 pm and -6 shows the reading recorded earlier in the evening, between 4pm-5pm. To view the UV / Barometer / Rainfall readings: 1. Press SELECT to navigate to the UV / Barometer / Rainfall Area. will show next to the Area. 2. Press MODE to toggle between UVI / Barometer / Rainfall readings. The corresponding icon will appear: UVI BAROMETER RAINFALL To select the measurement unit for the barometer or rainfall readings: In the UV / Barometer / Rainfall Area, press UNIT to switch between: • Barometer: Millimeters of mercury (mmHg), inches of mercury (inHg), millibars per hectopascal (mb). • Rainfall: Millimeters (mm), inches (in), recorded for that hour. NOTE As the purpose of the bar graph is only to provide a quick comparison between the records of the past 24 hours, the vertical axis cannot convert from inches to mm. Therefore, changing the measurement unit will have no effect on the bar graph display. UV INDEX The UV index levels are as follows: UV INDEX 0-2 3-5 6-7 8-10 11 and above DANGER LEVEL Low Moderate High Very high Extremely high ICON To view the maximum UV reading: 1. Press SELECT to navigate to the UVI / Barometer / Rainfall Area. will show next to the Area. 2. Press MODE repeatedly to select UV display. 3. Press MAX / MIN to toggle between current / MAX UV index display. The timestamp is displayed accordingly in the Clock Area. To clear maximum UV reading: 1. Press SELECT to navigate to the UVI / Barometer / Rainfall Area. will show next to the Area. 2. Press MODE repeatedly to select UV display. 3. Press and hold MAX / MIN to clear the readings. BAROMETER To set the altitude level compensation for the Barometer readings: 1. Press SELECT to navigate to the UVI / Barometer / Rainfall Area. will show next to the Area. 2. Press MODE repeatedly to select Barometric display. 3. Press and hold MODE to enter the altitude setting. 4. Press / to increase / decrease the setting value. 5. Press MODE to confirm the setting. RAINFALL To view the recorded rainfall of the current hour or last 24 hours: 1. Press SELECT to navigate to the UVI / Barometer / Rainfall Area. will show next to the Area. 2. Press MODE repeatedly to select Rainfall display. 3. Press MAX / MIN repeatedly to toggle between current, past 24 hour rainfall. BACKLIGHT Press LIGHT to activate the backlight for 5 seconds. RESET Press RESET to return to the default settings. SPECIFICATIONS BASE STATION Dimensions (L x W x H) Weight Battery 94 x 51 x 182.5 mm (3.7 x 2.0 x 7.2 inches) 241 g (8.5 oz) without battery 3 x UM-3 (AA) 1.5V INDOOR BAROMETER Barometer unit Measuring range Accuracy Altitude setting Weather display Memory mb, inHg and mmHg 700 - 1050mb/hPa +/- 10 mb/hPa Sea level User setting for compensation Sunny, Partly Cloudy, Cloudy, Rainy and Snowy Historical data and bar chart for last 24hrs INDOOR TEMPERATURE Temp. unit Displayed range Operating range Accuracy Memory °C / °F -50°C to 70°C (-58°F to 158°F) 0°C to 50°C (32°F to 122°F) 0°C - 40°C: +/- 1°C (+/- 2.0°F) 40°C - 50°C: +/- 2°C (+/- 4.0°F) Current, Min and Max temp. Dew Point w/ Min and Max INDOOR RELATIVE HUMIDITY Displayed range Operating range 2% to 98% 25% to 90% 9