Oster FPSTFP4600 English - Page 7
How to Chop - food processor disc stem
UPC - 034264434080
View all Oster FPSTFP4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
How to Chop NOTE: Make sure the unit is turned OFF and unplugged before use. Never use hand to push food into processor. Do not use the processor continuously for more than 3 minutes at a time. Multipurpose Blade: Use multi purpose blade for chopping, mixing, blending, pureeing and preparing puff pastry, crumbs and short crust pastry. 1 Lock the bowl onto base. (See "How to assemble the bowl") 2 Take the disc stem and slide it onto the center post. Then grasp the multi purpose blade by its stem and slide over the disc stem. (Figure 4) 3 Place food into bowl. 4 Lock cover onto bowl. (See "How to Lock the cover") Figure 4 5 Place the food pusher into the feed tube. 6 Plug the cord into an electric outlet. Use the Food Guide to prepare food for chopping. 7 Press the ON button for continuous processing or the PULSE button for short processing tasks. When using the PULSE setting, hold down the PULSE button for about 2-3 seconds at a time, check results and repeat if desired. 8 When finished processing, press the OFF button and allow the chopping blade to stop rotating. 9 Twist the cover counter-clockwise to remove lid. 10 Hold the disc stem with multi purpose blade attached by its stem and remove. Unlock the bowl by turning it counter- clockwise towards the UNLOCK mark, and lift off. Empty the processed food. NOTE: The 10 Cup Food Processor comes with a spatula to easily empty contents inside the bowl. NOTE: Chopping Blade is very sharp, use caution when handling. www.oster.com 7