Palm P80707US Handbook - Page 190
Connection Setting is set to On. See, HotSync operations, IR HotSync, operations
UPC - 805931007032
View all Palm P80707US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Appendix B Frequently Asked Questions I tried to do a remote (IR to On a Mac, check the following: phone) HotSync operation, but it did not complete successfully. (continued) s Make sure Modem is selected on the Connection Settings tab in the HotSync Software Setup window. s You may need to select a different Modem type on the Connection Settings tab. Most modems have a setup string that causes them to send initial connection sounds to a speaker. You can turn on the Modem Speaker option and use these sounds to check the modem connection. s Make sure your modem resets before you try again. (Turn off your modem, wait a minute, then turn it back on.) s Make sure the computer is not in sleep mode when you attempt a HotSync operation. Check the following on your handheld: s Make sure the dialing instruction dials the correct phone number. s If the telephone line you are using has Call Waiting, make sure you selected the Disable call waiting option under Modem Sync Phone Setup on your handheld and entered the correct code. s Make sure the telephone line you are using is not noisy, which can interrupt communications. s Check the batteries in your modem and replace them if necessary. I can't perform an IR HotSync operation. s On a Windows computer, be sure the HotSync Manager is running and the Serial Port for local operations is set to the simulated port for infrared communication. See "IR HotSync operations" in Chapter 14 for details. s On a Mac, open the HotSync Software Setup window and be sure HotSync Manager is enabled and that the IR Port Connection Setting is set to On. See "IR HotSync operations" in Chapter 14 for more information. s On your handheld, be sure the HotSync application is set to Local, with the option IR to PC/Handheld. s Be sure the IR port of your handheld is aligned directly opposite to, and within a few inches of, the infrared device of your computer. s IR HotSync operations do not work after you receive a low battery warning. Check the battery power of your handheld. Recharge the internal battery. 180