Palsonic 6159G Owners Manual - Page 11

OPERATION Tuning in (continued) Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. To preset channels (Manual search) Manual search If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search. 1. Press the MENU button repeatly to enter into the (PRESET) menu, or press the or button to select POSITION. Press the or button to setect a desired position number (from 0~255) Note: press the or button to select a channel number within 0.7 seconds. Press and hold the or button for over 0.7 seconds to select a decimal number 2. Press the or button to select SEARCH. Press the button to search channels from current channel to higher channel (the screen displaiys glittering (" "). Press the button to search channels from current channel to lower channel (the screen displaiys glittering (" "). When a channel is located, the searching stops, this channel is then memorized with the preset position number. Note: you can also make use of BAND selection to quicken the searching process in your desired band. Press the or button moves the band to the next step in the sequence below. VHFL VHFH UHF POSITION BAND SKIP SEARCH MFT AUTO MEMORY 008 VHFL OFF lllllllllllll lllllllllllllllllllllllllllllllll POSITION BAND SKIP SEARCH MFT AUTO MEMORY 008 VHFL OFF lllllllllllll lllllllllllllllllllllllllllllllll POSITION BAND SKIP SEARCH MFT AUTO MEMORY 008 VHFL OFF lllllllllllll lllllllllllllllllllllllllllllllll 3. When you want to store another channel at another position, repeat steps 1 & 2 above. 9