Palsonic DVD3632USB Owners Manual - Page 10

Basic Operation Before enjoying DVD/Divx/SVCD/Video CD/CD If you would like to change the menu language to other language, please refer to "Selecting language of On-Screen menu". In the explanation given below it is assumed that English has been selected as the menu language. Basic Play Preparations Switch the TV On and select "video" as the TV input. Switch on the stereo system's power if the player has been connected to a stereo system. Basic play 1. Press POWER to switch on the power 2. Press Open/Close to open the disc tray. 3. Place a disc onto the disc tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, alight it with the guides, and place it in its proper position. 4. Press Open/Close The disc tray is automatically closed and play begins. When the disc tray is closed by pressing OPEN/CLOSE the player will start to read the disc automatically 5. When a menu screen appears on the TV, move the navigation buttons or press the numeric buttons to select preferred track number, then press ENTER button to confirm. 6. When the menu continues onto another screen, press NEXT button to view the next screen, or press PREV. Button to skip to previous screen. Note: Due to the different design of some software titles, NEXT button may not always work. 7. To stop player and return to the menu screen, press TITLE button, or MENU button ( which button is pressed differs depending o the disc used.) For DVD, press TITLE, MENU or RETURN. For VCD, press RETURN. Stopping player Press stop For your convenience: When player is stopped, the player records the point where STOP was pressed (RESUME function). Press PLAY again, playback will return from this point. When the tray is opened or STOP is pressed again, the RESUME function will be cleared. Skipping ahead or back Skipping ahead Press NEXT button during play. A chapter (DVD) or a track (VCD/CD) is skipped forward each time the button is pressed. Skipping back Press PREV. button during play. A chapter(DVD) or a track (VCD/CD) is skipped backward each time the button is pressed. Rapid advance (Rapid reverse) During playback, press FF button or REV button to fast forward/review. Press PLAY button to resume normal play The forward/review speed as follows: 2X-4X-8X-20X Step play During playback, press STEP button, the play will be paused, and in this mode, each time the STEP button is pressed, the player will only one picture. To resume normal play, press PLAY button. 8 Basic Operation Slow-motion play ( DVD/VCD) On the remote control unit Press SLOW button during playback. Play the disc at a 1/2 of normal speed at first. Each time the button is pressed, the play speed becomes slower (1/2,1/3,1/4,1/5,1/6,1/7). Press PLAY button, normal play will resume. MP3 playback Basic play 1. Insert the disc containing the files in MP3 format to be played and after a few minutes, the TV screen will show all folders on the disc. 2. Select the folder you want to play by the navigation buttons and press ENTER button to confirm. 3. The files in this folder are displayed and select your favourable song by using the UP/DOWN navigatio buttons and press ENTER button to start playback. 4. Press NEXT button to play the next sound or PREV button to play correctly. 5. Press REPEAT button on remote to change play mode. USB/Card Play Mode 1. Insert the USB plug into the USB slot. 2. The "Read USB/Card" icon will appear at the top-left corner on the TV screen, and the machine will play the files in the folders automatically. 3. All files in folders will be showed on the TV screen and select your favorable files by using the navigator buttons and press ENTER to start play. 4. Press REPEAT button on remote to change play mode Enjoying Video CDs with playback control. When playing VCD2.0/3.0 with PBC, use PBC button the player will show PBC: [ ON ] Press PBC button once, the player will show PBC: [ OFF ] When the PBC is ON( menu play). 1. press numeric button to select corresponding track, if the track number is under 10, choose one of the numeric button 0-9. 2. If the track number is exceed 10, press+10 button first, then press numberic buttons 0-9. 3. During playback, press RETURN button to main menu. 4. Press NEXT button or PREV button, the player will play in the scheduled sequence on the disc. 9