Palsonic DVD3632USB Owners Manual - Page 9

Advance Operations ON Screen Display information When the player is under operation, press OSD button continuously on the remote control, the screen will display sequently parts of information, all information and clear information. DVD TT 0/55 CH 0/2 00:00:26 Press once more,it will show 1/1 5.1CH ...... OFF OFF Press OSD button again, the screen display will be cleared. Program Play The player plays the tracks in the disc in an order you desired. 1.Press PROGRAM button and the screen will display the program menu. 2.Press navigation buttons to choose memory index and then press the desired Titles/Chapters number by using the numeric buttons. The selected Titles and Chapters are stored into the memory. Up to 16 memories can be stored. Note: Leading zero is not necessary.If the track number is more than 10, press the +10 key first and then the unit digit. Examples: Track 3, press "3" Track12, press "+10" then "2" Track21, press "+10" twice then "1" 3. To start program play, select PLAY on The menu or select STOP button to exit Without program play. 4. To clear programmed items, scroll the navigation button to the items to be cleared and press CLEAR button on the remote control, the selected items will be deleted. Repeat Play Press REPEAT button during play, it will repeat play one chapter one title (for DVD), or repeat play track (forVCD/CD). For DVD disc CHAPTER Repeat chapter TITLE Repeat Title For VCD/CD disc I(n the PBC OFF mode ) REP (off) Repeat off REPr(ep1 ) Repeat 1 track REP (rep all) Repeat All tracks A-B Repeat play Repeating sections between two specified Points (A-B repeat) 1. Press A-B button during play at the point where repeat play is to be started (A). 2. Press A-B button at the point where repeat play is to be ended (B). Repeat play of the 3. Press A-B button to return to normal play. Remote control unit preparation Service life of batteries The batteries normally last for about one year although this depends on how often, and for what operations, the remote control unit is used. If the remote control unit fails to work even when it is operated near the player, replace the batteries use 2 size AAA batteries. Note: Do not use rechargeable (Ni-Cd) batteries Do not attempt to recharge, short-circuit, Disassemble, heat or throw the batteries into the fire. Do not drop, step on or otherwise impact the remote control unit. This may damage the parts or lead to Malfunction. Do not mix old and new batteries. If the remote control unit is not going to be used for a long time, remove the batteries. Otherwise, Electrolyte may leak which may lead not only to malfunction but also to burns ifcontact is made with the electrolyte. Wipe away any electrolyte leaking inside the remote control unit, and install new batteries. If any electrolyte should come into contact with parts of your body, wash it off thoroughly with water . A REMOTE SENSOR 30 30 3-4m Remote control operatio range A Point the remote control unit from no more than about 3-4 m from the remote control sensor and within about 60° of the front of the player. The operating distance may vary according to the brightness of the room. Note: Do not point bring lights at the remote control sensor. Do not place objects between the remote control unit and the remote control sensor. Do not use this remote control unit while simultaneously operating the remote control unit of anay other equipment. 10 7