Palsonic PDP4200 Owners Manual - Page 20

Memorising the Channels Your PDP TV can memorise and store all of the available channels. After the available channels are memorised, use CH to scan through the available stations. Storing Channels in Memory Automatically 1 Press MENU to display the menu main page. 2 Press VOL+/- repeatedly to display options menu page. tv tuner options 3 Press CH to select tv tuner item. 4 Press VOL+ or ENTER to access the submenu. If the search menu does not appear on the screen, press VOL+/- to select search menu page 5 Press CH twice to select autoset item. 6 Press ENTER to store channels in memory automatically. The unit will begin memorising all of the available channels. select to activate tuner menu search autoset to enable auto fine tune off on fine tune 50 channel skip off on manual search to enable Note: The process of auto memory will be stopped if you press the MENU button. After the process of auto memory, the auto fine tune item will be set to on automatically. Before you start auto channel memory, please refer to [Setting colour and Sound System] on page 25 to select a proper sound system according to your area. select to activate autoset channel searching please wait or press menu to cancel 12 Manual Search Use Manual Search if desired channels cannot be memorised or if you would like to store channels to specific channel numbers one by one. 1 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page. 2 Press CH repeatedly to select manual search item. 3 Press VOL+/- to start manual search. Pressing VOL+, the set searches towards higher frequency; Pressing VOL-, the set searches towards lower frequency; The search stops when a program is found and this program will be stored in current channel. search autoset to enable auto fine tune off on fine tune 50 channel skip off 40 manual search to enable select to activate manual search 19