Palsonic PDP4200 Owners Manual - Page 21

Memorising the Channels (continued) Setting Auto Fine Tune (AFT) 1 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page. 2 Press CH repeatedly to select auto fine tune item. 3 Press VOL+/- to select on or off. When the AFT is set to On, the unit will automatically tune the program frequency to provide the best possible picture and sound. search autoset to enable auto fine tune off on fine tune 50 channel skip off on manual search to enable right/left to adjust automatic fine tune Manual Fine Tuning 1 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page. 2 Press CH repeatedly to select fine tune item. 3 Press VOL+/- to fine tune till the best possible picture and sound are obtained. If you fine tune a program manually, the auto fine tune item will be turned to off automatically. search autoset to enable auto fine tune off on fine tune 50 channel skip off on manual search to enable right/left to adjust fine tuning Adding and Erasing Channels 1 Use number buttons to directly select a channel that will be added or erased. 2 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page. 3 Press CH repeatedly to select channel skip item. 4 Press VOL+/- to select on or off. When the item is set to on, the selected channel will be erased. When the item is set to off, the selected channel will be added. The erased channels can not be selected by using the CH buttons unless you use number buttons to input channel number directly. search autoset to enable auto fine tune off on fine tune 50 channel skip off on manual search to enable right/left to set channel skip 20