Palsonic WD805 Owners Manual - Page 13

Down mix: 1 means LT/RT output 2 means STEREO output Speaker Setup Page Downmix Front Speaker LRG Large Small 2.2 SPDIF OUTPUT SPDIF OUTPUT MODE: Sets the audio outputs. Under the status of SPDIF/RAM, can not adjust volume of DVD, CD, can adjust only under MP3 format. Spdif Setup Page Spdif Output RAW Spdif Off Spdif/Raw Spdif/Pcm This DVD player includes three kinds of audio output: 1. SPDIF OFF: An analog surround sound format is output through the back-panel connections for 2-CH audio out. 2. SPDIF/RAW or SPDIF/PCM: This surround sound format is output to a Dolby digital decoder through the optical and coaxial connectors on the back-panel of the product. 3. DOLBY DIGITAL SETUP PAGE 3.1 DUAL MONO DUAL MONO: If your amplifier/decoder has Dolby Digital output, you may select stereo, left mono, right mono, or mixed mono mode for your amplifier decoder. Dolby Digital Setup Dual Mono Dynamic Stereo L Mono R Mono Mix Mono 3.2 DYNAMIC DYNAMIC: This function is generally used when playing high volume programs at night, in order not to disturb the neighbor. This setting can dynamically lower the volume and still keep the original tone quality. This is the range, measured in decibels (dB), between the loudest and the quietest sound registers in a sound track. Dolby Digital Setup Dual Mono Dynamic 4. VIDEO SETUP PAGE 4.1 COMPONENT COMPONENT: Sets the video output. Video Setup Page Component Yuv TV Mode Sharpness Low Brightness 00 Contrast 00 S video Yuv SCART 4.2 TV MODE SETUP PAGE Video Setup Page Component TV Mode Sharpness Brightness Contrast YUV Low 00 00 P Scan Interlace NOTE: The setup is working at YUV/SCART situation only. 4.3 SHARPNESS SHARPNESS: Sets the sharpness level of video output. 12