Palsonic WD805 Owners Manual - Page 14

Video Setup Page Component Yuv TV Mode Sharpness Low Brightness 00 Contrast 00 High Medium Low Press right button, the TV will display below. Contrast 0 4.4 BRIGHTNESS BRIGHTNESS: Sets the brightness level of video output. Video Setup Page Component Yuv TV Mode Sharpness Low Brightness 00 Contrast 00 Press right button,the TV will display below. Brightness 0 Press LEFT/RIGHT button to adjust, then press ENTER button to confirm and return upon menu. 4.5 CONTRAST CONTRAST: Sets the contrast level of Video output. Video Setup Page Component Yuv TV Mode Sharpness Low Brightness 00 Contrast 00 Press LEFT/RIGHT button to adjust, then press ENTER button to confirm and return upon menu. 5. PREFERENCE SETUP PAGE The preference setting is active only when no disc. And the setting is effective on each time power on till exchanging the saved setting. 5.1 TV TYPE TV TYPE: This player supports different TV output, including AUTO, NTSC, and PAL systems. If your TV support only NTSC or PAL and had you inadvertently selected the wrong TV type, the TV screen will become flickering and black-and-white. In this case, you should press the SETUP button to set as following Note. Preference Setup Page TV Type PAL Audio Eng Subtitle Eng Disc Menu Eng Parental Password Default PAL AUTO NTSC Note: How to Set the TV Type? You may switch the NTSC/PAL setting of the DVD player to match the video signal of your TV. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC) Disc Type Format DVD NTSC PAL Output Format Selected TV System Mode NTSC NTSC PAL AUTO PAL NTSC PAL PAL 13