Palsonic pw418sfzr Instruction Manual - Page 12

3.2 Functions ① ② D E A B C （The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor） 1、Indicator ①Hi-Temp(High temperature alarm) ②Door Open(Door keep open for 300 seconds alarm ) 2、Button A.Quick Freeze button B.Lock button C.Freezer& Refrigerator conversion button D.Temperature setting down E.Temperature setting up 3、Funtion ●Freezer& Refrigerator conversion Long press for 3s, then the upper point shines with a beep, the appliance runs as a freezer. Long press for another 3s, then the upper point goes out and the low point shines with a beep, the appliance runs as a refrigerator. ●Quick Freeze Function setting Press to enter Quick Freeze Mode, then icon of snowflake shines.press again to exit the Quick Freeze Mode. if the internal temperature ＜-25℃, it will exit Quick Freeze Mode automatically after 3 hours, if the internal temp. can not reach -25℃, it will exit Quick Freeze Mode automatically after 24 hours. ●Centigrade-Fahrenheit conversion Long press and at same time for 3s until a beep, to change the temperature display. The default refrigerating and freezing temperature is 5℃ (41℉)/-18℃ (0℉).The temperature range of Freezer is -12℃~-24℃(10℉~-11℉). The temperature range of Refrigerator is 2℃~8℃ (35℉~46℉). ●Door open alert Open the door, the blue point is on, close the door, the bule piont is off. If the door is open over 300s while runnig, then the door open alert is activated and the blue point blink with buzzing. 10