Palsonic pw91dbf Instruction Manual - Page 5

4) Remove the plastic cover from door hinge first.Then unscrew the two screws from top bracket and replace on the other side. 5) To install the bracket on the left side of the appliance, screw the two screws through the bracket and into the top of the appliance.Slide the door back on to the top hinge.Ensure the door is face up.Replace the plastic cover on the top bracket by pressing down until it clicks into position. 6) Screw the bottom hinge into place on the new side. Replace the foot on the other side. 7) Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Readjust the leveling feet. 2.3 Door Space Requirements The unit's door must be able to open fully as shown. W×D≥800mm×780mm W 2.4 Levelling the Unit To do this adjust the two levelling feet at the front of the unit. If the unit is not level, the door and magnetic seal alignments will not be covered properly. 3 D