Palsonic tftv700hl Owners Manual - Page 11
Connecting to an External HDMI Signal Source, Connecting External Equipment to COMPONENT IN jacks
![]() |
View all Palsonic tftv700hl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
System Connections Connecting to an External HDMI Signal Source 1. Connect an HDMI signal source to one of the HDMI jacks on the rear panel of the unit. 2. After connection, turn on the power of the unit and the HDMI signal source. 3. Press INPUT then direction buttons to select HDMI 1, HDMI 2 or HDMI3 mode, and then press the OK button to confirm. HDMI provides both audio and video signals and typically provides superior image quality to AV and YPBPR. Connecting External Equipment to COMPONENT IN jacks 1. Use the AV cables to connect the external AV signal source to the MINI AV input jacks on the rear panel of the unit. 2. Use a component cable (not supplied) to connect an external AV signal source to the Y/PB /PR (Component) input jacks on the rear panel of the unit. NOTE: Match the jack colors (Y= green, PB= blue, and PR= red). 3. After connection, turn on the power of the unit and the external AV signal source. 4. Press INPUT then direction buttons to select YPBPR mode, and then press the OK button to confirm. 10
![](/manual_guide/products/palsonic-tftv700hl-owners-manual-17977a3/11.png)