Palsonic tftv700hl Owners Manual - Page 24

PVR Function In DTV Mode Only PVR function allows the unit to record live DTV program and make it available for reviewing at any time. NOTES:  When PVR function is in progress, please don't unplug the power and the external USB device at will.  When PVR function is active, the power indicator will blink with red and blue consecutively.  Before start recording a program, make sure the external USB device is connected.  While recording, if the available storage space becomes low, the recording will be automatically stopped. Time Shift Function This function allows you to pause and fast forward/rewind normal Live DTV viewing at any time without missing any of the live broadcast, provide that a USB storage device is connected. 1. While viewing a DTV program, press the button on the remote, the playback stops and an icon appears at the bottom left corner of the screen. Press the button again to start the time shift. You can press the Display button on the remote to open the progress bar, as shown below: In the progress bar, the current time behind live program and the free USB storage are displayed. 2. During the progress of the time shift, press the from the point where it was paused. button to continue playing the program 3. Press the ■ Stop button to stop the time shift. Recording program After you setup the Feature-PVR/Time shift, you can record a DTV program on the external USB device. 1. Select the desired program then press the REC. button on the remote control and an icon appears at the bottom left corner of the screen. Then press the button to start the record. 2. In the progress of the record, press the button to pause the recording. 3. Press the ■ Stop button to stop the recording. The recorded file will be stored in the external USB device automatically. During recoding, press POWER button, a dialog box appears: With it you can define how the TV set behaves in the progress of the record. 23