Panasonic 17 000lm / WXGA / 3-Chip DLP™ Projector Spec Sheet - Page 4
Software CD-ROM Logo Transfer Software, Multi Projector Monitoring
View all Panasonic 17 000lm / WXGA / 3-Chip DLP™ Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3-Chip DLP™ Projector Remote control unit Power supply Operation range*7 Dimensions (W × H × D) Weight Supplied accessories Optional accessories Zoom lens (1.0 - 1.2:1) Zoom lens (1.4 - 1.9:1) Zoom lens (1.8 - 2.7:1) Zoom lens (2.7 - 5.2:1) Zoom lens (5.1- 8.2:1) Zoom lens (8.2 - 15.4:1) Fixed-focus lens (0.8:1) Fixed-focus lens (0.40:1) Lens motor cover Ceiling mount bracket Projector mount bracket Frame Smoke cut lter Replacement lamp unit Replacement lamp unit for portrait mode Replacement lter unit PT-DW17K2 3 V DC (AA/R6 type battery × 2) Approx. 30 m (98 5 in) when operated from directly in front of the signal receptor 47.5 × 181.5 × 27.5 mm (1-7/8 × 7-5/32 × 1-3/32 inches) Approx. 150 g (5.3 oz) (including batteries) Power cord with security lock (× 1) Wireless/wired remote control unit (× 1) Batteries for remote control (AA/R6 type × 2) Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) (× 1) ET-D75LE6 ET-D75LE10 ET-D75LE20 ET-D75LE30 ET-D75LE40 ET-D75LE8 ET-D75LE50 ET-D75LE90 ET-D75MC1 ET-PKD520H (for high ceilings) ET-PKD520S (for low ceilings) ET-PKD520B ET-PFD510 ET-SFR510 ET-LAD520 (one bulb) ET-LAD520F (a set of four bulbs) ET-LAD520P (one bulb) ET-LAD520PF (a set of four bulbs) ET-EMF510 Weights and dimensions shown are approximate. Speci cations and appearance are subject to change without notice. *1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 With legs at shortest position. *4 Excluding the optional lens. *5 Average value (excluding the optional lens). May differ depending on models. *6 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the ET-LAD520P/LAD520PF lamp is mounted and the projector is used in portrait con guration. The operating tem- perature range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F to 86 °F). *7 Operation range differs depending on environments. As of August 2015 SFD15M028 4/11