Panasonic 17 000lm / WXGA / 3-Chip DLP™ Projector Spec Sheet - Page 9

3-Chip DLP™ Projector PT-DW17K2 Shift range Optical axis shift function allows to shift the position of a projected image as shown below. When the lens except the ET-D75LE6 is mounted 0.3H H (Width of projected image) 0.3H When the ET-D75LE6 is mounted 0.2H H (Width of projected image) 0.2H 0.6V 0.7V 0.2V 0.2V V (Height of projected image) 0.2V 0.2V V (Height of projected image) 0.6V 0.7V Standard postition of projected image Because the ET-D75LE50 is a xed short-throw lens, the lens shift function cannot be used with it. Standard postition of projected image Installable angle Install the projector at an angle within the range shown below. Vertical direction The projector may be installed at a vertical angle of 360°. Horizontal direction The projector may be installed at a horizontal angle of ±15°. 360° -15° +15° Vertical direction in portrait mode with the ET-LAD520P/LAD520PF mounted The projector may be installed at a vertical angle of ±15°. Horizontal direction in portrait mode with the ET-LAD520P/LAD520PF mounted The projector may be installed at a horizontal angle of ±15°. -15° +15° +15° -15° NOTE: The projector cannot be vertically installed all by itself. Also, the terminal side must face downward when vertically installed. As of August 2015 SFD15M028 9/11