Panasonic A-44-IR-V2 A-44-V2 Quick Start Guide - Page 6
A-44 V2/A-54 V2
View all Panasonic A-44-IR-V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
A-44 V2/A-54 V2 · Quick Start Guide ● Do not connect multiple devices to one power adapter as adapter may overload causing over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed. ● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Cautions ● Make sure the power supply voltage is correct before using the camera. ● Do not drop the camera or subject it to physical shock. ● Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, please replace the lens cap to protect the sensor from dirt. ● Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time. ● The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. ● Do not place the camera in environments that exceeds the temperature range of this product (the operating temperature 6