Panasonic A-54-V2 A-54-V2 AE Spec Sheet - Page 1

A&E SPECIFICATION Advidia A-54-V2 3MP WDR NETWORK DOME CAMERA TECHNICAL SPECIFICATIONS 2.1 GENERAL A. This product shall be manufactured by a firm whose quality system is in compliance with the ISO-9001 B. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer's system. C. All systems and components shall have been thoroughly tested and proven in actual use. D. All systems and components shall be provided with comprehensive repair and spare parts replacement. The manufacturer on warranty and non-warranty items shall guarantee the spare parts and the repair. E. All systems and components shall have been thoroughly tested and proven in actual use. F. All systems and components must be in compliance with FCC, CE, UL and RoHS requirements. G. All materials furnished under this item shall be compliant with 802.3 Ethernet standards H. Technical support shall be based in the Unites States and be available weekdays from 6:00 AM-6:00 PM Pacific Time 2.2 3MP WDR NETWORK DOME CAMERA A. The network camera shall offer three video streams with up to 3MP resolution (2048 x 1536) in progressive scan CMOS format, with H.264 video compression. B. The network camera shall be provided with a DC Iris, vari-focal lens with 2.8-9mm with motorized zoom and focus for remote setting over the network. C. The network camera shall provide true & day night (ICR) low-light capabilities with sensitivity down to 0.14Lux @F1.4,AGC ON, 0 Lux with IR D. The network camera shall provide up to 120dB of wide dynamic range (WDR). The WDR shall support both automatic and manual modes. The WDR shall be based upon luminance-adaptive Tone Mapping (LATM) and Space-variant Contrast Enhancement (SVCE) algorithms. E. The network camera shall support Back-Light Compensation (BLC) with selectable zones. F. The network camera shall offer video compression of H.264, MPEG-4 and MJPEG. Three H.264 streams shall be supported with independent resolution, bit rate and frame rates for the main, sub and third streams. G. The network camera shall support video motion detection with user defined areas and configurable sensitivity levels. In addition, the motion detection shall be supported by an arming schedule with the audible warning, surveillance center notification, email, and alarm output triggered as supported events. H. The network camera shall support smart features including intrusion zones, transverse plane (tripwire), facial detection, out of focus detection, out of position (tampering) detection and audio level detection. The smart function shall all be supported simultaneously without degrading camera performance. I. The network camera shall include embedded Linux OS and support IE and client software for network preview, and be capable of performing firmware upgrades through a network using a software-based device utility or through the web interface.