Panasonic A-54-V2 A-54-V2 AE Spec Sheet - Page 2

Advidia A-54-V2 3MP WDR NETWORK DOME CAMERA PAGE 2 J. The network camera shall be equipped with built-in password protection which is not dependent on a server. K. The network camera shall support standard IT protocols including: TCP/IP,ICMP,HTTP,HTTPS,DHCP,DNS,RTP,RTSP,RTCP,NTP, SMTP,SNMP,IGMP,IPv6,Bonjour(SIP optional). L. The network camera shall support industry standard Power over Ethernet (PoE) IEEE 802.3af for powering the camera over the network in addition to 12VDC local power. M. The network camera shall be vandal-resistant with impact ratings of IEC60068-275Eh, 50J; EN50102, up to IK10. N. The network camera shall be capable of being mounted to a 4S electrical box with no additional accessory items required. O. The network camera shall a built in, 850nm IR illuminator with 30 LEDs for an effective distance of up to 30m. P. The Network camera shall be compatible with a wide range of mounting accessories from the same manufacturer including but not limited to an indoor/outdoor pendant mount which is compatible with wall, pole, corner, ceiling brackets and an adapter for other manufacturers 1 ½" NPT mounts. U. The network camera shall provide the ability to take snapshot and record video clips from the web interface and store on the local computer. V. The network camera's web interface shall permit settings to be exported to and imported from a configuration file via the web interface, API and camera manufacturer's client software. W. The network camera shall conform to ONVIF, PSIA and CGI standards for integration with 3rd party video management systems (VMS). The camera may also support custom firmware for specific integration with a 3rd party VMS. X. The network camera shall be compatible with a Video Management Software (VMS) package and Mobile Phone Application from the same manufacturer which is provided free of charge. The VMS shall not be a restricted use version of the manufacturer's full featured version. Y. The network camera shall meet or exceed the following design and performance specifications. 2.3 ELECTRICAL SPECIFCATIONS A. Power Supply 12 VDC ± 10%; Terminal Block PoE (802.3af); RJ45 B. Power Consumption Max. 9W C. Network Interface D. Audio In/Out E. Alarm Inputs- 1 F. Alarm Outputs -1 100Base-TX RJ45 Connector Connector Connector G. RS-485 Connector 2.4 CAMERA A. Image Sensor B. Min. Illumination C. Shutter Time D. Iris Mode E. Lens F. Lens Mount AE spec A-54-V2 1/3" Progressive Scan CMOS 0.14 Lux @ (F1.4, AGC ON), 0 lux with IR 1s to 1/100,000s DC drive 2.8-9mm @ F1.4, angle of view: 91.2°-28.3° Φ14