Panasonic AG-HMC40PJ User Manual - Page 102
RECORD SETUP screen, Setup menu list continued
View all Panasonic AG-HMC40PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Setup menu list (continued) RECORD SETUP screen Item Display mode Q.MENU Description of settings REC FORMAT CAMERA Selects the recording format. PH 1080/60i PH 1080/30P PH 1080/24P PH 720/60P PH 720/30P PH 720/24P HA 1080/60i HG 1080/60i HE 1080/60i • PH 1080/24P and PH 720/24P represent native recording. • You cannot change the format during interval recording. PREREC MODE CAMERA Sets PRE RECORDING to ON or OFF. (Page 46) ON OFF • TCG is set to FREE RUN. • Cannot be set during INTERVAL REC. TIME STAMP CAMERA Specifies whether date and time information is superimposed over recorded images. ON: Superimposes date and time information on the image. OFF: Does not superimpose date and time information on the image. INTERVAL REC CAMERA Enables frame-by-frame recording at specified intervals to create short videos of scenes with slow movement over long periods of time. Single frames are recorded at the specified interval, with 24 frames equaling 1 second of video. OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE, 2 MINUTES • When INTERVAL REC is enabled, the following setting items automatically change as follows. REC FORMAT: PH 1080/24P, TC MODE: NDF TC MODE CAMERA Selects the correction mode of the internal time code generator when the time code of the internal time code generator is recorded. DF: Uses the drop frame mode. NDF: Uses the non-drop frame mode. • TC MODE is automatically set to NDF when you set recording frame rate of recording format to 24P. TCG CAMERA Sets the mode in which you advance the internal time code generator. FREE RUN: The time code is advanced regardless of the operation mode. A slight time error may occur when switching to PB mode if the frame rate is set to 24P. REC RUN: The time code is advanced only when recording. TC PRESET CAMERA Sets the initial time code. YES NO • Set the frame value to 0 or a multiple of 4 when you set recording frame rate of recording format to 24P. If any other value is set, the recorded time code will mis-match. UB PRESET CAMERA Sets the user information. YES NO : Can also be configured in Quick Menu. (Page 96) indicates the factory setting. 102