Panasonic AG-HMC40PJ User Manual - Page 107
SW&DISP SETUP screen continued, Display example
View all Panasonic AG-HMC40PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
SW&DISP SETUP screen (continued) Item SMOOTH ZOOM STOP CAM GAIN LIMIT FACE FRAMING ZEBRA DETECT MARKER GUIDE LINES HISTOGRAM Display mode CAMERA PHOTO CAMERA PHOTO CAMERA PHOTO CAMERA PHOTO CAMERA PHOTO PHOTO PHOTO Q.MENU Description of settings Selects the method in which zoom operations are stopped. ON: Smooth stop. OFF: Precise stop. Sets the maximum value for camera gain. CAMERA mode 24 dB: Camera gain can be set to up to 24 dB. 12 dB: Camera gain can be set to up to 12 dB. PHOTO mode 18 dB: Camera gain can be set to up to 18 dB. 12 dB: Camera gain can be set to up to 12 dB. Sets the detection frame displays when A O N is selected in auto mode. OFF: Not displayed. PRIMARY: Displays only the primary frame. ALL: Displays all face detection frames. Selects the brightness level of the left-leaning zebra patterns on the screen. 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50% Select ON to display the marker. ON OFF To display the marker, press the ZEBRA button. Displays guide lines for confirming level shooting. OFF, , , • Guide lines are not recorded on images. • Guide lines do not appear when the face detection function is set to ON. Displays a graph with the horizontal axis representing brightness, and the vertical axis representing number of pixels. You can determine the exposure distribution of an entire image by viewing the distribution in the graph. ON OFF ■ Display example Menu Dark Standard Light • Adjust the brightness by adjusting the aperture. SAFETY ZONE CAMERA Sets SAFETY ZONE. OFF, 90%, 4:3 REC COUNTER CAMERA Selects counter operation during recording. TOTAL: The count continues to increase until the RESET button is pressed to reset it. CLIP: Resets the counter at start of recording and counts the time of each recording session. • In PB mode, operation is always in CLIP mode. : Can also be configured in Quick Menu. (Page 96) indicates the factory setting. 107