Panasonic AG-HPX600PJ Studio System 300 Installation Guide - Page 33
AG-HPX500 DA
View all Panasonic AG-HPX600PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Panasonic Solutions Company Section 6 - AG-HPX500 DA Using the AG-HPX500 with an on Board Monitor The AG-HPX500 uses a Standard Definition B&W View Finder. This image will appear very soft if the on board monitor was connected to the camera VF Out. For this reason, we DO NOT recommend the BT-CS910G VF cable. An AJA Model HD10DA is recommended as a better solution. Because the AJA HD10DA has an Input voltage rage from 5 to 18 Volts DC, it makes it a very suitable choice. This will provide a much better image on the on board monitor (and in Color). SDI MultiTap SDI PowerTap28 BT-Mount Parts List AJA HD10DA AJA P-Tap Power Cable Power Tap 28 Cable Multi-Tap BT-LH910 BT-Mount or Yoke Mount 33 SDI OUT
Section 6 – AG-HPX500 DA
33
Using the AG-HPX500 with an on Board Monitor
The AG-HPX500 uses a Standard Definition B&W View Finder.
This image will appear very soft if the on board monitor was connected
to the camera VF Out. For this reason, we DO NOT recommend the BT-CS910G VF cable.
An AJA Model HD10DA is recommended as a better solution. Because the AJA HD10DA
has an Input voltage rage from 5 to 18 Volts DC, it makes it a very suitable choice.
This will provide a much better image on the on board monitor (and in Color).
SDI OUT
SDI
SDI
PowerTap28
MultiTap
BT-Mount
Parts List
AJA HD10DA
AJA P-Tap Power Cable
Power Tap 28 Cable
Multi-Tap
BT-LH910
BT-Mount or Yoke Mount
Panasonic Solutions Company