Panasonic AG1340P AG1340P User Guide - Page 39

Dirt on the video heads, Surge Absorber, CVC Crystal View Control, Indicator, Longrun Head System - phones

Page 39 highlights

Dirt on the video heads If the video heads get dirty, pictures will not be recorded or played back clearly. (See the following conditions.) Normal picture Small amount of dirt Large amount of dirt If this happens, insert and eject a cassette 5-10 times successively to remove the dirt from the video heads. If a clear picture is not produced, insert a commercially available cleaning cassette. Then, press [REC (REC/OTR)] and keep it running for approximate 10 seconds to clean the video heads. If the problem still persists after performing all of the measures listed above, contact a service personnel to request assistance. Heads mainly become dirty because of scratched or dirty tapes, use of the unit in places where temperature and humidity are high, dust in the air and other reasons. Never use tapes on which juice has been spilt or those that are extremely damaged since this will not only cause the heads to become dirty, but will also make the unit malfunction. Surge Absorber For added protection for this product, these models are equipped with new surge absorbing circuit which prevents damage due to power surges caused by induced lightning. - This function may not be effective for surges by direct lightning. CVC (Crystal View Control) Indicator The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. While the VCR is turned on, the CVC indication is always displayed to show that the Crystal View Control is activated. Longrun Head System This longrun head system enables approximately 8,000 hours of recording/ playback with high quality images. Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects heads from dust and prevents head clogging. Plus, "Alumina" Head Cleaner further enhanced cleaning efficiency. - Based on in-house tests with Panasonic video cassettes. Actual head life may vary according to conditions of use, tape type, temperature, humidity, etc. The serial number of this product can be found on the rear panel. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase Dealer purchased from Dealer Address Dealer Phone No. Model No. AG-1340P Serial No. 39 Helpful Hints

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

39
Helpful Hints
Dirt on the video heads
If the video heads get dirty, pictures will not be
recorded or played back clearly.
(See the following conditions.)
Small
amount
of dirt
Large
amount
of dirt
If this happens, insert and eject a cassette
5
10 times successively to remove the dirt
from the video heads.
Normal
picture
If a clear picture is not produced, insert a
commercially available cleaning cassette.
Then, press [REC (REC/OTR)] and keep it
running for approximate 10 seconds to clean
the video heads.
If the problem still persists after performing all
of the measures listed above, contact a service
personnel to request assistance.
Heads mainly become dirty because of
scratched or dirty tapes, use of the unit in
places where temperature and humidity are
high, dust in the air and other reasons.
Never use tapes on which juice has been spilt
or those that are extremely damaged since this
will not only cause the heads to become dirty,
but will also make the unit malfunction.
Surge Absorber
For added protection for this product, these
models are equipped with new surge absorbing
circuit which prevents damage due to power
surges caused by induced lightning.
This function may not be effective for surges
by direct lightning.
CVC (Crystal View Control)
Indicator
The crystal view control function ensures that
you always obtain the optimum picture quality
so that you get the best picture automatically.
While the VCR is turned on, the CVC indication
is always displayed to show that the Crystal
View Control is activated.
Longrun Head System
This longrun head system enables
approximately 8,000 hours of recording/
playback with high quality images. Newly
developed head cylinder with narrower head
windows and tapered cylinder design
effectively protects heads from dust and
prevents head clogging. Plus,
Alumina
Head
Cleaner further enhanced cleaning efficiency.
Based on in-house tests with Panasonic
video cassettes. Actual head life may vary
according to conditions of use, tape type,
temperature, humidity, etc.
The serial number of this product can be
found on the rear panel. No others have the
same serial number as yours. You should
record the number and other vital information
here and retain this book as a permanent
record of your purchase to aid identification in
case of theft.
Date of Purchase
Dealer purchased from
Dealer Address
Dealer Phone No.
Model No.
AG-1340P
Serial No.