Panasonic AGDVC30 AGDVC30 User Guide - Page 38
Vibration Reduction Function, Wind Noise Reduction, Movie-like Shooting
View all Panasonic AGDVC30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Shooting techniques for different targets (cont.) O The aperture (IRIS) cannot be adjusted with the multi dial in the IR and SUPER_IR modes; however, both the aperture and gain can be adjusted in the COLOR_NS mode. (P44) O You can change the lighting control of the IR light using the IR LED item on the OTHER FUNCTIONS screen. (P80) O Do not look directly at the IR light when it is on. O Do not cover the IR light with your hand or anything else. O When using the camera-recorder's IR light, remove the lens hood before you start to shoot. (P18) O For shooting at an even higher sensitivity, we recommend that you use the optional IR light (AG-YRL30G). O Performing high-sensitivity shooting may give rise to such problems as after-image, a deterioration in the image quality and difficulties in focusing. When SUPER_IR or COLOR_NS has been selected as the high-sensitivity shooting mode, images are shot with the CCD taking about 16 times more time than usual to accumulate the signals. As a result, very small brilliant points that are not usually visible may be recorded as the images: this is normal and does not indicate an error or malfunctioning. Vibration reduction function If you are going to hold the camera to shoot, you can use the vibration reduction function to achieve shooting with minimal vibration (camera shake). appears on the screen when this function is working. RESET SEARCH DIGITAL ZOOM SEARCH REC BARS PHOTO SHOT COUNTER RESET MODE CHK ZEBRA OIS AUTO MANUAL O It may not be possible to reduce the vibration at such times when the vibration is severe or when a moving subject is being tracked and shot at the same time. O The vibration reduction function may not work properly when the digital zoom function is working. Wind noise reduction When "ON" has been selected as the WIND CUT item setting on the RECORDING SETUP screen using the menus (P68-P71), the noise created by wind blowing into the microphone on very windy days can be reduced. (P76) When the wind noise reduction is activated, WIND CUT appears on the screen. O The wind noise reduction function works for both the internal microphone and external microphone. O If there is any bass sound, some of it may be reduced along with the wind noise. Movie-like shooting When "4. MOVIE-LIKE" has been selected as the SCENE FILE item setting on the SCENE FILE screen using the menus (P68-P71), you can shoot movie-like images. (P73) To release the function, press the OIS (Optical Image Stabilizer) button. When the OIS button is pressed again, the function is reactivated. If you use a tripod, you can obtain natural images by shooting with the vibration reduction function released. 38