Panasonic AJ-HPM200 Operating Instructions - Page 154
Recording Remote Input Signals, Recording P2 card material in AVCHD
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Recording P2 card material in AVCHD Recording Remote Input Signals To make a recording in AVCHD from a P2 card, perform the required clip editing in playlist mode and play back the final video to record it on an SD memory card. ■ Preparing for dubbing 1 Set recording and playback format. Perform the following settings in the listed setup menus. 020 SYS FORMAT 025 REC FORMAT(HD) 1080i or 720p DVCPROHD, AVC-I 100, AVC-I 50 2 Set setup menu No.028 (AVCHD FMT) appropriately. Select AVCHD recording rate (PH, HA, HG or HE). ◆ NOTE: • Selecting 720P will engage PH mode regardless of AVCHD FMT setting. 3 Insert an SD memory card in the slot. ■ Starting dubbing to AVCHD 1 Create material required for dubbing using playlist. 2 Press the SHIFT + REC button. Playback from the current playlist location starts simultaneous with recording to the SD memory card. This type of recording records the time code in the playback material. Recording stops when playback reaches the end or if the SD memory card becomes full and further recording is not possible. 3 Press STOP at the end. Recording and playback stop. ◆ NOTE: • If input reference signal is not stable during dubbing, dubbed video will be distorted. Input stable reference signal, or perform dubbing without inputting reference signal (internal reference). External signals are simultaneously recorded to a P2 card and an SD memory card. It is not possible to record only to an SD memory card. ■ Preparing for recording 1 Set up for AVCHD recording. Set setup menu No. 170 (AVCHD REC) to ON. 2 Select a recording format. Set the P2 card and AVCHD recording formats as shown below in the listed setup menus. 25 SYSTEM FREQ 020 SYS FORMAT 025 REC FORMAT(HD) 028 AVCHD FMT 59.94 or 50 1080i or 720p DVCPROHD, AVC-I 100, AVC-I 50 PH, HA, HG, HE 3 Set recording audio channels. AVCHD recording uses 2 channels for recording. Use setup menu No. 774 (AVCHD A CH) toset recording channels. ■ Recording to P2 cards and SD memory cards 1 Engage P2 card recording/playback mode. 2 Press the REC + PLAY button to start recording. Simultaneous recording on the P2 card and SD memory card starts. ◆ NOTE: • If P2 card recording is not possible, AVCHD recording will not be possible either. • The "REC P2&AVCHD" indicator appears in the LCD monitor when an AVCHD recording is made to an SD memory card. • AVCHD recording is not available when 480i or 576i is set in setup menu No. 020 (SYS FORMAT). • AVCHD recording is not available when something other than 59.94 or 50 is set in setup menu No. 25 (SYSTEM FREQ). • The start and end of recording will not match the clip recorded on the P2 card. • Loop recording is not performed in AVCHD even when setup menu No. 041 (LOOP REC) is set to ON. • The same time code as that on the P2 card is recorded. • Use the menu in AVCHD mode to set metadata for an AVCHD recording. • AVCHD recording is not possible for composite signal input and 1394 input. 3 Press the STOP button to end recording. 154 AVCHD Recording and Playback: Using an Optional AVCHD Board