Panasonic AJ-PCS060G P2 Drive - Multi Language - Page 18

Copying (continued) Canceling copy operations You can cancel copying in progress as follows. 1. Hold the [CANCEL] button for at least 2 seconds The [COPY STATUS], [P2C], and [HDD] LEDs change as follows. : LED lit OR : orange COPY STATUS OR OR OR OR OR ʵ ʵ 2. Press the [POWER] button Copying is canceled and the [COPY STATUS] LEDs go out. Note: Canceling copy automatically deletes copied data. Formatting Formatting P2 cards You can delete all data on P2 cards. Data cannot be recovered after formatting. Before formatting cards, make sure all the data may safely be deleted. Do not turn the unit OFF or eject P2 cards when the [P2C] LED is flashing. This may damage the P2 card. P2 cards cannot be formatted if the write-protect switch is set to PROTECT. Additionally, when P2 cards are inserted in the slot, you cannot adjust the write-protect switch to prepare them for formatting. 1. With the unit ON, insert a P2 card in the slot 2. Hold the [P2C] button for at least 2 seconds The [COPY STATUS], [P2C], and [HDD] LEDs change as follows. : LED lit OR : orange : LED flashing COPY STATUS OR OR OR OR OR OR ʵ 3. Within 2 seconds, press the [START] button The [COPY STATUS], [P2C], and [HDD] LEDs go out, and P2 card formatting begins. Formatting is complete when the [P2C] LED flashes in orange. Note: While the [COPY STATUS], [P2C], and [HDD] LEDs are on in step 2, if you do not press the [START] button within 2 seconds (step 3), the P2 card will not be formatted. To format the card, repeat the process from step 2. E-17