Panasonic AJ-PCS060G P2 Drive - Multi Language - Page 25

ENGLISH P2Store Manager screens (continued) Maintenance section Displays the total time that the internal HDD has been in use. Drive mount setting button (only for Windows) You can select mounting on a drive letter or specified folder. When the [Drive mount setting] button is clicked, the following screen is displayed. • When mounting on a drive letter: 1. Select [Mount on drive letter]. 2. Click the [OK] button. 3. Restart the unit according to the instructions on the screen. • When mounting on a specified folder 4) - : 12) 1. Select [Mount on NTFS folder]. When modifying the drive mount point folder, click the [Browse] button and specify the mount point. 2. Click the [OK] button. 3. Restart the unit according to the instructions on the screen. Note: 1) If you format the HDD using Macintosh software, always confirm that all data has been erased after formatting by unplugging and plugging in the USB 2.0 cable and checking. 2) Before using [Quick format] and [All erase], put the unit on a stable surface. Vibration or impact may damage the unit during formatting. Using [Quick format] or [All erase] will delete all data on the internal HDD. If data you need is stored on it, back up the data to separate storage media before formatting. 3) It takes about 45 minutes to write zeros to all sectors. Always do this with an AC adapter connected. 4) When [Mount on NTFS folder] is selected, each partition of the internal HDD of the unit is sequentially mounted on the subfolders "pa01" through "pa15." If the subfolders "pa01" through "pa15" don't exist under the specified folder, these subfolders are automatically created. 5) The specified NTFS folder cannot be mounted for the following cases. • When the subfolders "pa01" through "pa15" are not empty. • When the file system is not NTFS. 6) After executing [Mount on NTFS folder], the partitions of the internal HDD of the unit are sometimes not sequentially mounted on the subfolders "pa01" through "pa15" when the internal HDD of the unit is formatted or when a P2 card that is 8 GB or more is copied to the unit. When the unit and the computer are going to be connected, we recommend that you perform mounting. 7) If the number of the partitions is less than 15, when the internal HDD of the unit is formatted and reconnected after mounting is performed, a confirmation dialog is displayed. Follow the instructions on the screen. 8) When the input folder name does not exist, a confirmation dialog is displayed. Click [Yes] after confirming this input folder name. 9) If the subfolders "pa01" through "pa15" are accessed after mounting when the unit and the computer are not connected, a confirmation dialog may be displayed. 10) When disconnecting the unit from the computer after executing [Mount on NTFS folder], only one drive letter that was assigned on the P2 card is displayed. 11) The icon display for subfolders "pa01" through "pa15" may be different after executing [Mount on NTFS folder]. However, data accesses will be performed without problems. 12) When copying the data in subfolders "pa01" through "pa15" after executing [Mount on NTFS folder], perform a "copy" rather than a "move." E-24