Panasonic AJHD1700 AJHD1700 User Guide - Page 78

System menus No./Item 00 WFM SEL 05 ENCODER SEL 06 V LEVEL CTRL Description of setting This enables one of a number of different signals to be output from the VIDEO OUT 2 output connector. 0000 CTL: The CTL signal is output. 0001 TC: The time code signal is output. 0002 VIDEO: The video output signal is output. 0003 RF_L: The PB L RF signal is output. 0004 RF_R: The PB R RF signal is output. 0005 ENV_L: The PB L ENV signal is output. 0006 ENV_R: The PB L ENV signal is output. • The setting can be changed at any time without being affected by the system menu item No.30 (MENU LOCK) setting. • The output signals during normal playback virtually maintain the levels given below. CTL: 0.1 to.3Vp-p TC: 0.6Vp-p VIDEO: 1.0Vp-p For setting whether to perform the various adjustments for the video output signals using this VTR or using an external encoder remote controller. 0000 REMOTE: The various adjustments for the video output signals are performed by an external encoder remote controller. 0001 LOCAL: The various adjustments for the video output signals are performed using this VTR. 0002 BOTH: The various adjustments for the video output signals are performed using both this VTR and an external encoder remote controller. For selecting what is to be controlled when the video output level is to be adjusted by an external encoder remote controller. 0000 HD: The HD video output level can be adjusted. 0001 SD: The SD video output level can be adjusted. 0002 BOTH: Both the HD and SD video output levels can be adjusted. The underlining (__) denotes the factory setting mode. Video output signal adjustments The control matrix for the adjustments is shown in the table below. When "CMPNT" has been selected as the setup menu item No.650 (STYLE) setting Setting 05: ENCODER SEL 06: V LEVEL CTRL REMOTE HD SD BOTH LOCAL BOTH HD SD BOTH HD SD BOTH Adjustment item 653: Y LVL (HD) 654: Pb LVL (HD) 655: Pr LVL (HD) 656: BK LVL (HD) 658: Y LVL (SD) 659: Pb LVL (SD) 660: Pr LVL (SD) 661: BK LVL (SD) External encoder remote controller No adjustments possible External encoder remote controller No adjustments possible External encoder remote controller External encoder remote controller AJ-HD1700 AJ-HD1700 External encoder remote controller/AJ-HD1700 AJ-HD1700 AJ-HD1700 External encoder remote controller/AJ-HD1700 External encoder remote External encoder remote controller/AJ-HD1700 controller/AJ-HD1700 External encoder remote controller: Only adjustments of the external encoder remote controller are performed. AJ-HD1700: Only adjustments of the setup menu items are performed. External encoder remote controller/AJ-HD1700: Adjustments can be performed from both the external encoder remote controller and setup menus. Use the AJ-ER50, an optional accessory, as the external encoder remote controller. However, its VIDEO PHASE and SYNC PHASE controls will not work. When "CMPST" has been selected as the setup menu item No.650 (STYLE) setting Setting 05: ENCODER SEL 06: V LEVEL CTRL REMOTE LOCAL BOTH HD SD BOTH HD SD BOTH HD SD BOTH Adjustment item 662: V LEVEL 663: C LEVEL 664: HUE ( or C PHASE) 665: SETUP LVL (or BK LVL) External encoder remote controller AJ-HD1700 External encoder remote controller/AJ-HD1700 External encoder remote controller: Only adjustments of the external encoder remote controller are performed. AJ-HD1700: Only adjustments of the setup menu items are performed. External encoder remote controller/AJ-HD1700: Adjustments can be performed from both the external encoder remote controller and setup menus. Use the MT-200 (manufactured by Musashi and recommended by Panasonic) as the external encoder remote controller. However, its VIDEO PHASE, SYNC PHASE and SC PHASE controls will not work. 78